Frontier RUT-G 2005, Руководство пользователя

Страница: 31 / 66

LON INTERFACE KEY
Kele • RUT-G Manual 2005 • www.kele.com • USA 888-397-5353 • International 901-382-6084
31
The NVO screen (Figure 14A) is used for output network variables (outputs to the network). The NV value is received
by the Frontier Gateway from a Frontier field transmitter. The values entered on this screen must be related to the
programmed targeted field transmitter.
Note that the "Transmitter Lost Signal Response" is not on the NVI screen as it only applies to NVO screens. See
"Transmitter Lost Signal Response" on page 32.
The NVO screen is used to receive values from a field transmitter and transmit the value in SNVT form to the LON
network. All NVO screens set up the Frontier Gateway as a receiver for Frontier field transmitters (RI-4, RTR, RTU,
etc.). The values on this screen must match the values in the field transmitter.
NVO SCREEN
Figure 14A