Frontier RUT-G 2005, Руководство пользователя

Страница: 28 / 66

LON INTERFACE KEY
Kele • RUT-G Manual 2005 • www.kele.com • USA 888-397-5353 • International 901-382-6084
28
The NVI screen is used to input network variables. The value is transmitted to a Frontier receiver. The values entered
on this screen must be related to the programmed targeted field receiver.
The NVI screen (Figure 10) is used to transmit the network variables to a Frontier field receiver point. All NVI screens
set up the Frontier Gateway as a transmitter for Frontier field receivers (RO-4, RDO-2, etc.). The values on this screen
must match the values in the field receiver.
The above NVI screen shows a Network Variable (NVI [0]). The NV shown is an SNVT_Vol_f that has an index of 65.
This SNVT is a float type. The SNVT format is SNVT_vol_f#US, that is U.S.-measured units.
NVI SCREEN
Figure 10