manualshive.com logo in svg

Fri-Jado STG5, Руководство по обслуживанию, Страница: 29 / 74

Поделиться
Скачать
Fri-Jado STG5 Скачать руководство пользователя страница 29

Page 29

Service Manual STG5/7 intelligent STW5/7 intelligent   form 9123999   rev. 05/2010

ADDITIONAL SOFTWARE

The FIPS application (Fri-Jado Intelligent Program System) can be used to load and download 
the cooking programs and to load the system software.
 

The full describtion of the fIPS application can be found in the Service Manual:

                                                                              

I-CONTROL SOfTWARE.

Listed below are the features of the FIPS application:

Updating the unit software

• 

Loading of recipies to and from the unit.

• 

Creation of recipes.

• 

Modification of recipes.

• 

Deletion of recipes.

• 

Sorting of recipes.

• 

Loading and saving recipes from/to file.

• 

Adding a single recipe to the listing.

• 

Loading HACCP data from the unit.

• 

ThE fIPS APPLICATION

PARAMETER LIST STG-I

ADDITIOnAL SOFTWARE

PARAMETER LISTInGS

The explanation and listing of the parameters for the i-control system can be 

found in the Service Manual:

 

                                                                              

I-CONTROL SOfTWARE.

Содержание STG5











































































Отзывы:

Нет отзывов