STG7
STG5
Page 20
Service Manual STG5/7 intelligent STW5/7 intelligent form 9123999 rev. 05/2010
REMOVAL AND REPLACEMENT OF PARTS STG
Caution:
Do not touch the glass. Moisture
from hands could affect the live span of the
lamp. The moisture can be removed with
alcohol while the lamp is cold.
Note:
Use a clean rag or paper towel to
replace the lamp.
Remove the insulators of the lamp.
1.
Remove the bolt from each end of the
2.
lamp and remove the lamp.
Install the lamp with the painted side to-
3.
wards the top of the oven. Hold the metal
when tightening the bolts to prevent the
metal from twisting and damaging the
lamp.
Tighten the insulators evenly to prevent
4.
damage.
QUARTz LAMP
Remove the right side panel according to
1.
prior procedure.
Remove the suction and fan plate on the
2.
inside of the oven.
(STG 5 only) Remove the nut on the clamp
3.
and slide clamp towards yourself. Loosen
the screw in the clamp that secures the
probe and remove the probe.
(STG 7 only) Remove the thermostat-
4.
probe from the clip in the oven and guide
it outside through the opening in the side
wall.
Remove the screws on the electric panel
5.
that secure the thermostat.
Remove the thermostat and disconnect
6.
the wiring.
Reverse the procedure to install.
7.
Note:
Set the new high limit thermostat to
its maximum position.
hIGh LIMIT ThERMOSTAT