
Page 19
Service Manual STG5/7 intelligent STW5/7 intelligent form 9123999 rev. 05/2010
REMOVAL AND REPLACEMENT OF PARTS STG
Remove the right side panel according to
1.
prior procedure.
Disconnect the lead wires to the switch.
2.
Push down on the locking tab and lift
3.
out and then up to remove it from the
mounting bracket.
Reverse the procedure to install.
4.
ELECTRIC PANEL
CONTACTOR
1. Remove the right side panel according
prior procedure.
2. Remove the bolt and nuts on the inside
bottom of the electric panel.
3. Disconnect the wiring.
4. Lift the electric panel out of the locking
slots and remove the panel.
5. Reverse the procedure to install.
Remove the right side panel according to
1.
prior procedure.
Disconnect the wiring and flatcable on
2.
the board.
Remove the board from the clips by press-
3.
ing the clips together.
Reverse the procedure to install.
4.
POWER AND I/O BOARD