manualshive.com logo in svg

Fri-Jado STG5, Руководство по обслуживанию, Страница: 12 / 74

Поделиться
Скачать
Fri-Jado STG5 Скачать руководство пользователя страница 12

Page 12

Service Manual STG5/7 intelligent STW5/7 intelligent   form 9123999   rev. 05/2010

PROGRAMMING INSTRUCTIONS

TESTING A PROGRAM

With the test program you can run a pro-
gram while it is possible to change time and 
temperature during the process.

Press the program key.

Note:

 when a pin code has been set, first 

enter the code and confirm with OK.

Go to “test program” with the turning knob 
and confirm with OK.

Select the program to test and confirm 
with OK. 

By pressing the Ok key during the 

running of the program, settings can be 
changed.

Go to save program and confirm with Ok.  
New settings are now saved.

ALPhABETIC SORTING Of PROGRAMS

With this function it is possible to alphabeti-
cally sort the programs.

Press the program key.

Go to “alphabetic sort” with the turning knob 
and confirm with OK.

Note:

 This function is only availble when there 

are several programs programmed into the 
memory.

Содержание STG5











































































Отзывы:

Нет отзывов