manualshive.com logo in svg

Fri-Jado STG5, Руководство по обслуживанию, Страница: 10 / 74

Поделиться
Скачать
Fri-Jado STG5 Скачать руководство пользователя страница 10

Page 10

Service Manual STG5/7 intelligent STW5/7 intelligent   form 9123999   rev. 05/2010

PROGRAMMING INSTRUCTIONS

Extra time can be added to a program either 
during a program or after a program has 
ended by pressing the power button.

Extra time is added to the end of the 
program, the window for adding extra time 
(shown on the left) always shows the total 
amount of extra time added to the program.

note: Extra time can be added unlimited 
times. 
Extra time can be added till max. 10 minutes 
after ending of the cooking time.

ADDING ExTRA TIME TO A PROGRAM

OPTIONAL fUNCTIONS

Interrupting an active program

• 

Adding extra time to a program

• 

Editing a program

• 

Deleting a program

• 

Press start/stop key. Heating, blowers and 
rotation stops.

Press start/stop key again to resume.

INTERRUPTING A PROGRAM

Testing a program

• 

Alphabetic sorting of programs

• 

Setting a timer

• 

Demonstration mode

• 

Содержание STG5











































































Отзывы:

Нет отзывов