
Tabs
Page 26
Service Manual STG5/7 intelligent STW5/7 intelligent form 9123999 rev. 05/2010
REMOVAL AND REPLACEMENT OF PARTS STW
Remove the right side panel and the fan
1.
plate according to prior procedures.
Remove the thermostat probe from
2.
the clamp inside the cavity and guide it
outside through the opening.
Disconnect the wiring from the thermo-
3.
stat.
Remove the thermostat from the main
4.
switch by squeezing the tabs and pull the
thermostat away.
Reverse the procedure to install.
5.
ThERMOSTAT
Remove cover plate on the knob with a
1.
small screw driver.
Loosen the screw inside the knob.
2.
Remove the knob with ring.
3.
Reverse the procedure to install.
4.
Note:
check that the back plate is in the right
position and runs free from the panel.
kNOB
MAIN SWITCh
Remove the right side panel according to
1.
prior procedure.
Remove the knob according to prior
2.
procedure.
Remove the screws that secure the main
3.
switch and remove the switch.
Disconnect the wiring from the switch.
4.
Remove the thermostat from the main
5.
switch according to prior procedure.
Reverse the procedure to install.
6.