
Page 28
Service Manual STG5/7 intelligent STW5/7 intelligent form 9123999 rev. 05/2010
REMOVAL AND REPLACEMENT OF PARTS STW
Remove the right side panel, racks, bot-
1.
tom plate and the fan plate according to
prior procedures.
Disconnect the wiring from the element.
2.
Remove the nuts and rings that secure the
3.
element and remove the element.
Reverse the procedure to install.
4.
Remove the nuts of the cover profile.
1.
Push the lamp to either side and pull it
2.
down to remove the lamp.
Insert one end of the new lamp in the
3.
socket and push it in. Align the other end
of the lamp with the socket and allow the
spring tension to push the lamp in place.
Replace the cover profile.
4.
Note:
Be sure that the “drop” on the lamp is
on the bottom side.
hEATING ELEMENT
hALOThERM LAMP