Fresenius Vial INJECTOMAT 2000 Anasthesie, Техническое руководство

Страница: 46 / 82

Page : 42 NT 0928 Rev.A0
3.3.15. Calibration values display
tESt.E tESt.E
This test allows to show the calibration values stored in the EEPROM.
Every value is displayed on 3 digits.
The first line gives the shorted name of the value.
Example:
Test E LOW Test E LOW
082 082
The keys and allows to pass from one channel to an other.
bat1 alarm and pre-alarm battery voltage: 6.3 V
bat2 pre-alarm battery voltage: 5.9 V
bat3 alarm battery voltage: 5.7 V
HIGH displacement potentiometer with large 115.0 mm spacer
LOW displacement potentiometer with small 20.0 mm spacer
0G force meter with 0 kg
5Kg force meter with 5 kg
3.3.16. Syringe type display
tESt.F tESt.F
This test displays the type of syringe fitted to the Injectomat. The type is defined with the indications
given by the optos of the syringe clamp.
The type of syringe is displayed with its capacity: 20cc (20/25cc), 50cc (50/60cc). The capacity may not
be displayed if the parameters in EEPROM indicate that certain types of syringes are not included.
When the syringe clamp is in the higher and the lower position 4 dashes are displayed.
The display is constantly updated in relation to changes in the syringe clamp system.
3.3.17. Displays of the last 10 events before the last blocking error
tESt.J tESt.J
This test allows to display the 10 last events before the last blocking error.
3.3.18. Drug library
tESt.L tESt.L
This test allows to read the name, the author and the date of the protocol library registered in the device.