Fresenius Vial INJECTOMAT 2000 Anasthesie Скачать руководство пользователя страница 33

Страница: 33 / 82

NT 0928 Rev.A0

page : 29

3. Enter a value or a name; example:

Allows to select the digit or the letter (underlined).

Allows to increase the value of the selected character.

Allows to decrease the value of the selected character.

Allows to valid this choice.

At any time, the key

STOP

allows to get out the parameter entering mode without saving the out-

standing parameters.

Parameters list:

PAr1: Infusion flow memorization (yes or no).

PAr2: Syringe selection mode.

PAr3: Keyboard selectionnable infusion maximum flow rates.

PAr4: Selectionnable syringe list configuration.

PAr5: Compulsory purge (yes or no).

PAr6: Infusion quick start (yes or no).

PAr9: RS232 communication speed.

PArA: Empty syringe mode.

PArB: Time to preventive check.

PArC: Memorised protocols list

PArD: Flange detection mode.

PArE: Programmed bolus flow rates configuration.

PArF: Bolus flow rate configuration.

PArH: Language configuration.

PArJ: Main line disconnection.

PArL: "Drug name" and "Syringe in place" alternative display.

3.1.3.1. Infusion flow memorization (yes or no):

PAr.1

This parameter allows to choose if the infusion flow rate has to be memorised or not, when switching off
the Injectomat 2000 Anästhesie.

: yes.

: no.

Содержание INJECTOMAT 2000 Anasthesie



















































































Результаты поиска

Содержание INJECTOMAT 2000 Anasthesie

Отзывы:

Бренды по названию

Популярные бренды

Fresenius Vial INJECTOMAT 2000 Anasthesie, Техническое руководство

Результаты поиска

Содержание INJECTOMAT 2000 Anasthesie

Отзывы:

Бренды по названию

Популярные бренды