Fresenius Vial INJECTOMAT 2000 Anasthesie, Техническое руководство

Страница: 31 / 82

NT 0928 Rev.A0 page : 27
3 CONFIGURATIONS, CALIBRATIONS AND CHECK
3.1. CONFIGURATIONS
3.1.1. Configuration of the pressure functions
The different operating possibilities presented will be particularly useful for adapting the syringe pump to
the specific needs of each department.
Fresenius Vial recommends the presence of its qualified personnel or of a member of the Technical De-
partment of your establishment to help you implement the configuration procedures you wish to choose.
q N.B.: You can leave the configuration mode at any time by pressing the OFF key.
3.1.2. Moving to the pressure configuration mode
Configuration mode access is activated, when switching on, by simultaneously pressing on the keys
and until the display
:
PrES.1
allows to scroll the parameters:
PrES.1, PrES.2, PrES.3,
etc.......... on the 7 segment screen.
allow to valid your choice and to enter in the menus.
Inside the menus, the keys: and , allow to display the chosen values.
q
PrES.1: Pressure limit memorization.
q PrES.2: Maximum pressure limits.
q PrES.3: Pressure drop detection threshold.
3.1.2.1. Pressure limit memorization
PrES.1 PrES.1
Allows to memorize the pressure limit which will be proposed every switching on.
This value is adjustable between 100 and 1100 mm Hg by step of 50 mm Hg.
Example:
Pres 1 Pres 1
950 mm Hg 950 mm Hg
If no value is memorised, the display is:
Pres 1 Pres 1
___ mm Hg ___ mm Hg
and it is the used pressure at the last switching off, which will be saved and proposed by default at the
next switching on.