Fresenius Medical Care 5008, Руководство по эксплуатации

Страница: 62 / 328

Chapter 5: Preparation
5-12 Fresenius Medical Care 5008 OP 5/09.06
O
Rinse procedure completed
Endless rinse will start when the Online rinse volume and the Online UF
rinse volume have been reached.
The delivery rate of the blood pump is automatically reduced to
50 ml/min, and the dialysate flow is reduced to EcoFlow (100 ml/min).
In case of ONLINE
plus ™, the total flow is composed of EcoFlow
(100 ml/min) and the respective substituate rate.
5.1.8 Checking/Setting the Dialysate Parameters
The Prescr. Bic can be reduced to 25.0 mmol/l during preparation
(adjustable in the Technician's Setup). If the Bic reduction is selected,
25.0 mmol/l appears below the value Prescr. Bic. The Bic reduction is
de-activated when the treatment starts.
After completion of the T1 test, the EcoFlow (100 ml/min) is
automatically selected. The flow can be changed as desired.
In the DIALYSATE MENU
Check the dialysate parameters.
Set the desired parameters. Touch the
OK button to confirm the values
entered.
Visually check the confirmed values.
Touch the PREPARATION menu button to return to the
PREPARATION SCREEN.
5.1.9 Checking/Setting the UF Parameters
Note
Calcium carbonate precipitations may occur in the bicarbonate dialysis,
depending on the use and the dose of the concentrates and the duration
of the treatment. Detailed information will be provided by the
manufacturer on request.
On the PREPARATION SCREEN you can directly check,
select and change the Prescr. Na and Prescr. Bic
parameters.
On the PREPARATION SCREEN you can directly check,
select and change the UF goal, UF time and UF rate
parameters.