manualshive.com logo in svg

Fresenius Medical Care 5008, Руководство по эксплуатации

Поделиться
Скачать
Fresenius Medical Care 5008 Скачать руководство пользователя страница 319

Chapter 21:  Option BVM (Blood Volume Monitor)

Fresenius Medical Care 5008 OP 5/09.06

21-5

21.6 Displaying Graphics

Depending on the settings in the Operator setup, the following items can 
be displayed in the respective treatment menu:
– BVM UFR, displays the UF rate, the RBV and the control ranges 

depending on the crit. RBV.

– BVM BPM, displays the RBV and the blood pressure measurement 

values (Systolic and Diastolic).

– BVM events, displays the events occurred during UF control.

(e.g. Operator: operator changed parameters.)
(e.g. Warning: operator made a selection after a warning message 
displayed by the 5008.)

21.7 Alarm Processing

Message

Message: 

BVM adaption mode: Achieving UF goal is uncertain. Reduce 

critical RBV by 1 % or continue UF control. – Crit. RBV 

Reduce

 – 

Control 

Continue

 

This message is displayed only during the first half of the volume to be 
removed. Depending on the current RBV, this step may be repeated 
several times.

Touch the 

Reduce

 button, if the patient's condition is good. The new 

crit. RBV will be set.
(If a PatientCard is used, this new crit. RBV will also be used for the next 
treatment.)

Touch the 

Continue

 button, if the patient's condition is not good. The 

control continues in the usual manner.

Message

Message: 

BVM: Achieving UF goal is uncertain. Continue UF control or 

set a minimum BVM rate of XXX ml/h. – Control 

Continue

 – Minimum 

rate 

Set

 

This message is displayed only during the first half of the volume to be 
removed.
If the patient's condition is good, this may be because the crit. RBV is 
too high.

Touch the 

Continue

 button for the control to continue without any 

modification. The message will be repeated if the RBV does not 
increase again.

Touch the 

Set

 button to set the minimum BVM rate. The message is 

displayed only once during the first half of the volume to be removed. 
Until the end of the treatment, at least the minimum BVM rate will be 
used (lower limitation of the BVM rate), even if the RBV continues to 
decrease. If the patient recovers, treatment will be performed with a 
higher BVM rate, according to the RBV.
The minimum UF goal prescribed will imperatively be respected.

After the UF control parameter (e.g. UF goal) was changed, the BVM 
minimum rate is automatically cleared.

Содержание 5008









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды