manualshive.com logo in svg

Fresenius Medical Care 5008, Руководство по эксплуатации

Поделиться
Скачать
Fresenius Medical Care 5008 Скачать руководство пользователя страница 123

Chapter 6:  Treatment

Fresenius Medical Care 5008 OP 5/09.06

6-11

The blood pump is delivering.
Set the delivery rate of the blood pump to the desired value.

Optical detector sensed blood.

Message: 

Blood detected - Double-Needle dialysis 

Start

 – Single-

Needle dialysis 

Start

The blood pump stops. The arterial/venous occlusion clamp closes.

Mute

 LED is flashing.

Touch the

 Double-Needle dialysis 

Start

 

button.

The Single-Needle line segment is removed.

Message: 

To continue: 

-  Open the door - Remove the SN pump 

segment - Press the SN line guide again into the Single-Needle pump 
until a signal is sounded - Close the door.

The system automatically changes to the TREATMENT SCREEN.
Heparin pump and ultrafiltration are started automatically, if preset in 
the Operator Setup. Set the blood flow to the desired delivery rate. The 
alarm limits will be set automatically.

The substituate pump will start automatically after approx. 3 minutes.
The substituate pump may also be started in advance by touching the 

Sub pump I/O

 button.

(The substituate pump will be stopped in the event of a blood or a 
dialysate alarm.)

6.3.2

Changing the ONLINE

plus

™ Parameters

In the 

ONLINE

 menu

Touch the 

Sub pump I/O

 button to turn the substituate pump on or off.

If Online parameters are to be changed:
Set the desired Online parameters. Touch the 

OK

 button to confirm the 

values entered.
Visually check the confirmed values.

Touch the 

TREATMENT

 menu button to return to the TREATMENT 

SCREEN.

6.3.3

ONLINE

plus

™  Bolus Administration

Touch the 

ONLINE

 menu button.

Caution

 

When using high-flux dialyzers and selecting low UF rates there is a 
possibility of local backfiltration.
Backfiltration depends on:
– the type of high-flux dialyzer
– the different flow resistances on the dialysate and the blood side
– the viscosity of the blood

Содержание 5008









































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды