Fresenius Medical Care 5008, Руководство по эксплуатации

Страница: 173 / 328

Chapter 9: Alarm Processing
Fresenius Medical Care 5008 OP 5/09.06 9-17
9.9 Screen Failure
O
Screen failure, no screen reaction
Reinfusion with rinse solution.
Disconnect the arterial patient connection and connect it to the rinse
solution bag.
Flip the handle outwards. Pull out the knob on the handle tray. Only
rotate the handle clockwise.
Remove the venous patient connection line from the venous occlusion
clamp. Visually check the line for air.
Manually return the blood.
Remove the venous patient connection after manual blood return.
Close the clamps on the blood lines.
Manually remove the blood lines. Manually open the arterial pressure
measurement unit.
O
Screen failure, screen dark or display distorted
Reinfusion with rinse solution.
All monitoring systems are active.
Disconnect the arterial patient connection and connect it to the rinse
solution bag.
Touch the Blood system Start button (green).
Caution
Touch the Blood system Stop button (red).
The pumps will be stopped.
(blood pump, substituate pump, optionally Single-Needle pump)
Emergency operation:
Perform a manual reinfusion
To return the blood to the patient, use the handle integrated in the pump
rotor. For manual reinfusion, remove the venous patient access line
from the venous occlusion clamp. Visually check the line for air
(emergency operation)!
Direction of rotor rotation:
When using the handle, please observe which way the rotor rotates.
Only rotate clockwise as shown on the pump housing.
Caution
Touch the Blood system Stop button (red).
The pumps will be stopped.
(blood pump, substituate pump, optionally Single-Needle pump)