23
3.4.14
Parameter menu
3.4.15
Mode lock
3.4.16
Resets
Press the Lock button and the Alarm silence button simultaneously to
enter the parameter menu, see Section 3.6, page 28. Exit the menu by
pressing the Lock button and the Alarm silence button simultaneously
again.
Press the Lock button and the Alarm silence button simultaneously to
enter the parameter menu. The wrench and the current mode symbol
flash in the display. Press the Mode button once and the mode symbol
will stop flashing.
To enable lock mode, press the Lock button and the Alarm silence
button simultaneously to leave the parameter menu. To disable Lock
mode enter the parameter menu by pressing the Lock button and the
Alarm silence button simultaneously and press the Mode button once
and the mode symbol will flash again. Press the Lock button and the
Alarm silence button simultaneously to leave the parameter menu.
Information
A beep sounds if the Mode button is pressed while the mode lock
is enabled.
Press the upper +/– buttons for more than 3 seconds until a beep sounds
to reset all values to the default factory settings.
Press the Info button for more than 3 seconds until a beep sounds to
reset the administered volume.
