Freiberg
Instruments
GmbH
ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany
38 / 78
After the measurement sequence of a slot is completed, its status in the
sample list
changes
to
measured
. If a measurement contains detection via photomultiplier, at the beginning of
the data recording the
data view
window (Figure 18) shows up. This window provides a live
view of the current measurement. It can be hidden by closing the window and reopened by
clicking
Analysis
->
Open measurement live
view in the menu bar.
At the beginning of every new measurement the window will be cleared in prepare for new
data to be shown. When all assigned measurements are finished, the system will go back in
standby- mode indicated by the caption of the
measurement
button which changes back to
start measurement
. With selecting the
stop after current position
checkbox the
measurement flow could be stopped after the current sample has been processed.
Figure 18: data view
3.4.5.
Handle measurement data
Every measurement with a standard photomultiplier is saved in two separate ways.
The measurement curve is saved in a separate file with the
.csv
file format and can be
accessed by clicking
Analysis
->
Open measurement folder.
This folder contains a
subfolder for every sequence. The files in this folder are named after the sample slot name in
the sample list. The files can be imported in other applications for further processing.
