Freiberg Instruments lexsyg research Скачать руководство пользователя страница 25

Страница: 25 / 78

Freiberg

Instruments

GmbH

ּ Am St. Niclas Schacht 13 ּ 09599 Freiberg – Germany

25 / 78



no stray-light transmission outside the optical path



optimized filter-sets for all main quartz and feldspar minerals luminescence emission

and other materials/applications available



filter sets (interference, colour-glass optical filters) optimised for highest transmission

individual wave-bands and best blocking stimulation light (OSL) and/or thermal noise

(TL, black-body radiation)



modified detection windows can be ordered (includes software-adaption)

malfunction / PMT-damage software protected

2.1.11.

Module 6.1.3: Reduced PMT optics unit

These optical modules are designed for use with PMT units only. They are best performed to

collect the luminescence light from the sample, suppress stray-light (OSL, PL) or thermal

noise (TL), filter it and transfer the light efficiently to the photo-cathode of the PMT.



configuration to perform optimized TL/OSL analyses in dating and other applications



optics designed for high-efficiency PMT luminescence measurements



1measurement function of 6.1.2 is included (more information on request)



malfunctions / PMT-damage are software protected



no stray-light transmission outside the optical path



optimized filter-sets for all main quartz and feldspar minerals luminescence emissions

and such for other materials/applications are available

2.1.12.

Module 6.2.1: Imaging optics adaption & filter

changing unit for TL/OSL measurement position

The

lexsyg

can adapt imaging light detectors based on charged coupled devices; in

particular an EMCCD based module (5.2.1) is available for spatially resolved measurements,

incl. single-grain measurements. Such detection units need advanced optical design for best

imaging quality within a chosen wavelength-band to be measured which is set by the optical

filters detection- window. Imaging units also work with PMT detectors and thus assure best

performance if a LEXSYG measurement chamber with automatically detector change is in

use.



necessary for spatially resolved / single-grain TL/OSL measurements

Содержание lexsyg research















































































Результаты поиска

Содержание lexsyg research

Отзывы:

Бренды по названию

Популярные бренды

Freiberg Instruments lexsyg research, Руководство и документация

Результаты поиска

Содержание lexsyg research

Отзывы:

Бренды по названию

Популярные бренды