manualshive.com logo in svg

Freescale Semiconductor PXR4030, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor PXR4030 Скачать руководство пользователя страница 704

FlexRay Communication Controller (FLEXRAY)

22-120

Freescale Semiconductor

PXR40 Microcontroller Reference Manual, Rev. 1

22.6.6.4.6

Message Transmission

For double transmit message buffers, the message buffer search checks only the transmit side part. The 
internal scheduling ensures, that the internal message transfer is stopped on the message buffer search start. 
Thus, the transmit side of message buffer, that is not in its transmission or status update slot, is always in 
the Idle state.

The message transmit behavior and transmission state changes of the transmit side of a double transmit 
message buffer are the same as for single buffered transmit buffers, except that the transmit side of double 
buffers can not be locked by the application, i.e. the HU and HL transition do not exist. Therefore, refer to 

Section 22.6.6.2.5, Message Transmission. 

22.6.6.4.7

Message Buffer Status Update

The message buffer status update behavior of the transmit side of a double transmit message buffer is the 
same as for single transmit message buffers which is described in 

Section 22.6.6.2.7, Message Buffer 

Status Update.

Additionally, the slot status field of the commit side is update after the update of the slot status field of the 
transmit side, even if the commit side is locked by the application. This is implemented to provide the slot 
status of the most recent transmission slot.

22.6.7

Individual Message Buffer Search

This section provides a detailed description of the message buffer search algorithm. 

The message buffer search determines for each enabled channel if a slot 

s

 in a communication cycle 

c

 is 

assigned for frame or null frame transmission or if it is subscribed for frame reception on that channel.

The message buffer search is a sequential algorithm which is invoked at the following protocol related 
events:

1. NIT start

2. slot start in the static segment

3. minislot start in the dynamic segment

The message buffer search within the NIT searches for message buffers assigned or subscribed to slot 1. 
The message buffer search within slot 

n 

searches for message buffers assigned or subscribed to slot

 n+1

.

In general, the message buffer search for the next slot 

n

 considers only message buffers which are

1. enabled, i.e. MBCCSRn[EDS] = 1, and

2. matches the next slot 

n

, i.e. MBFIDRn[FID] = 

n

, and

3. are the transmit side buffer in case of a double transmit message buffer.

On top of that, for the static segment only those message buffers are considered, that match the condition 
of at least one row of 

Table 22-112

. For the dynamic segment only those message buffers are considered, 

that match the condition of at least one row of 

Table 22-113

. These message buffers are called 

matching

 

message buffers. 

Содержание PXR4030



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды