manualshive.com logo in svg

Freescale Semiconductor PXR4030, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor PXR4030 Скачать руководство пользователя страница 442

AMBA Crossbar Switch (XBAR)

14-10

Freescale Semiconductor

PXR40 Microcontroller Reference Manual, Rev. 1

14.3.3

Master Ports

The XBAR terminates an access and it is not allowed to pass through the XBAR unless the master 
currently is granted access to the slave port to which the access is targeted. A master access is taken if the 
slave port to which the access decodes is either currently servicing the master or is parked on the master. 
In this case, the XBAR is completely transparent and the master access is immediately transmitted on the 
slave bus and no arbitration delays are incurred. A master access stall if the access decodes to a slave port 
that is busy serving another master, parked on another master or is in low-power park mode.

If the slave port is currently parked on another master or is in low-power park mode, and no other master 
is requesting access to the slave port, then only one clock of arbitration is incurred. If the slave port is 
currently serving another master of a lower priority and the master has a higher priority than all other 
requesting masters, then the master gains control over the slave port as soon as the data phase of the current 
access is completed. If the slave port is currently servicing another master of a higher priority, then the 
master gains control of the slave port after the other master releases control of the slave port if no other 
higher priority master is also waiting for the slave port. 

A master access is responded to with an error if the access decodes to a location not occupied by a slave 
port. This is the only time the XBAR directly responds with an error response. All other error responses 
received by the master are the result of error responses on the slave ports being passed through the XBAR.

14.3.4

Slave Ports

The goal of the XBAR with respect to the slave ports is to keep them 100% saturated when masters are 
actively making requests. To do this the XBAR must not insert any bubbles onto the slave bus unless 
absolutely necessary.

There is only one instance when the XBAR forces a bubble onto the slave bus when a master is actively 
making a request. This occurs when a handoff of bus ownership occurs and there are no wait states from 
the slave port. A requesting master which does not own the slave port is granted access after a one clock 
delay.

The only other time the XBAR has control of the slave port is when no masters are making access requests 
to the slave port and the XBAR is forced to either park the slave port on a specific master, or place the 
slave port into low-power park mode. In these cases, the XBAR forces IDLE for the transfer type.

14.3.5

Priority Assignment

Each master port must be assigned a unique 2-bit priority level in fixed priority mode. If multiple master 
ports are assigned the same priority level within a register (XBAR_MPR) undefined behavior results.

14.3.6

Arbitration

XBAR supports two arbitration schemes; a simple fixed-priority comparison algorithm, and a round-robin 
fairness algorithm. The arbitration scheme is independently programmable for each slave port.

Содержание PXR4030



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды