manualshive.com logo in svg

Freescale Semiconductor PXR4030, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor PXR4030 Скачать руководство пользователя страница 332

Interrupts and Interrupt Controller (INTC)

10-32

Freescale Semiconductor

PXR40 Microcontroller Reference Manual, Rev. 1

INTC current priority register (INTC_CPR). The results of those comparisons are used to manage the 
priority of the ISR being executed by the processor. The LIFO also assists in managing that priority.

10.4.2.1

Current Priority and Preemption

The priority arbitrator, selector, encoder, and comparator submodules shown in 

Figure 10-1

 are used to 

compare the priority of the asserted interrupt requests to the current priority. If the priority of any asserted 
peripheral or software configurable interrupt request is higher than the current priority, then the interrupt 
request to the processor is asserted. Also, a unique vector for the preempting peripheral or software 
configurable interrupt request is generated for INTC interrupt acknowledge register (INTC_IACKR), and 
if in hardware vector mode, for the interrupt vector provided to the processor.

10.4.2.1.1

Priority Arbitrator Submodule

The priority arbitrator submodule compares all the priorities of all of the asserted interrupt requests, both 
peripheral and software configurable. The output of the priority arbitrator submodule is the highest of 
those priorities. Also, any interrupt requests which have this highest priority are output as asserted 
interrupt requests to the request selector submodule.

10.4.2.1.2

Request Selector Submodule

If only one interrupt request from the priority arbitrator submodule is asserted, then it is passed as asserted 
to the vector encoder submodule. If multiple interrupt requests from the priority arbitrator submodule are 
asserted, then only the one with the lowest vector is passed as asserted to the vector encoder submodule. 
The lower vector is chosen regardless of the time order of the assertions of the peripheral or software 
configurable interrupt requests.

10.4.2.1.3

Vector Encoder Submodule

The vector encoder submodule generates the unique 9-bit vector for the asserted interrupt request from the 
request selector submodule.

10.4.2.1.4

Priority Comparator Submodule

The priority comparator submodule compares the highest priority output from the priority arbitrator 
submodule with PRI in INTC_CPR. If the priority comparator submodule detects that this highest priority 
is higher than the current priority, then it asserts the interrupt request to the processor. This interrupt request 
to the processor asserts whether this highest priority is raised above the value of PRI in INTC_CPR or the 
PRI value in INTC_CPR is lowered below this highest priority. This highest priority then becomes the new 
priority which is written to PRI in INTC_CPR when the interrupt request to the processor is 
acknowledged. Interrupt requests whose PRI

n

 in INTC_PSR

n

 are zero does not cause a preemption 

because their PRI

n

 is not higher than PRI in INTC_CPR.

Another function of the priority comparator subblock is to signal an update of the INTC_IACKR_PRC0  
and INTC_IACKR_PRC1 with the vector number of the first interrupt that arrives that has a priority higher  
than the current priority. Once the vector number and priority are captured, they cannot be superseded by  
a higher priority interrupt until an update of the INTC_CPR_PRC0 or INTC_CPR_PRC1 occurs.

Содержание PXR4030



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды