manualshive.com logo in svg

Freescale Semiconductor PXR4030, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor PXR4030 Скачать руководство пользователя страница 1178

Enhanced Time Processing Unit (eTPU2)

29-10

Freescale Semiconductor

PXR40 Microcontroller Reference Manual, Rev. 1

29.1.2.2

eTPU Enhancements over TPU3

•

32 orthogonal channels with enhanced functionality. Full support for double action with double 
match and double transition sub-mode combinations.

•

Input and Output features separated in channel logic and microinstructions, allowing input and 
output signals to be processed separately or combined.

•

Increased time resolution and execution unit to 24 bits.

•

Increased linear code memory, shared by two eTPU Engines, configurable up to 16K positions (64 
Kbytes).

•

Increased SDM address range (8 Kbytes each Engine) and width (32 bits per parameter). The SDM 
can be dynamically allocated to support variable number of parameters for each channel. Each 
channel can have access to at least 256 parameters.

•

The SDM is fully shared by two eTPU Engines (SDM), supporting direct inter-engine 
communication with the help of hardware semaphores.

•

Enhanced arithmetic operations, including add/subtract with carry, absolute value, multiple shift 
and rotate, conditional execution with variable operand widths.

•

Enhanced logic operations, including bitwise operations (and, or, xor) and bit manipulation, with 
conditional execution. Support for read-modify-write of any bit in the SDM.

•

Hardware for Multiply/MAC/Divide, running in parallel to execution of other operations. The 
24-bit divide result is available after 13 other unrelated instructions. Multiplication supports any 
data width of both operands (8, 16 or 24 bits), signed or unsigned. A 24x24 Multiply/MAC result 
is available after four other unrelated instructions. A 24x8 Multiply/MAC result is available after 
one other unrelated instruction.

•

Supports export/import of time bases from other sources through the real time bus (STAC - Shared 
Time and Counter bus). This internal bus is used for sharing real time data between multiple 
peripherals.

•

Contains angle clock hardware, supported by microcode, which can provide a 24-bit angle bus 
instead of time bus. This feature enables the eTPU to run angle based engine control applications.

•

More interrupt types. Each eTPU channel can generate a data transfer request interrupt, in addition 
to regular interrupts, and one global exception interrupt. Data Transfer requests can be used either 
as interrupt sources or DMA requests. This feature takes advantage of DMA peripherals which 
off-load the Host. Interrupt Overflow status is also provided.

•

Improved visibility to the Host (pin states, time bases, serviced channel).

•

An edge case of priority inversion on TPU3 Scheduler was resolved.

•

Supports channel link requests between eTPU Engines.

29.1.2.3

eTPU2 Enhancements over eTPU

•

TCR1, channel logic and digital filters (both channel and TCRCLK) now have an option to run at 
divisions of full system clock speed, besides eTPU clock / 2.

•

Channels support unordered transitions: transition B can now be detected before transition A. 
Related to this enhancement, TDLA and TDLB can now be independently negated by microcode. 
Refer to the 

eTPU Reference Manual

 for details.

Содержание PXR4030



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды