Operation and Maintenance Manual
OnyX Pride Recuperators February 2019
Frapol Sp. z o.o. reserves the right to introduce changes without any prior notice.
Page
7
3.
General
information.
This Operation and Maintenance Manual contains information regarding installing, commissioning, and maintaining of OnyX
recuperators manufactured by FRAPOL. Read the instructions and recommendations, before carrying out any operation on
the device. Damage to the unit, resulting from failing to follow the instructions, in particular by improper storage or
transport, incorrect connecting, and ignoring operational activities, are not subject to warranty repairs.
CAUTION!
Warranty
does
not
cover
materials
and
consumables,
in
particular
the
following:
air
filters
and
fan
bearings.
3.1
Identification
and
documentation
of
the
recuperator.
The recuperator has a rating plate, which identifies the most important technical parameters of the device. A sample rating
plate:
This Maintenance and Operational Manual is provided to the customer together with an invoice, warranty, and declaration
of conformity, and any additional instructions that may be applicable.
Should you need to contact a service centre, please specify the type and serial number of the unit (look for the sticker located
near the rating plate).
3.2
Intended
use
and
scope
of
application.
The OnyX recuperators are used to prepare air in ventilation and air-conditioning systems, in residential buildings,
commercial buildings, public utility buildings, and industrial facilities.
The units can be used for air treatment with the maximum dust concentration of 0.5mg/m3.
The permissible temperature range of the air supplied to the recuperator is as follows:
•
From -20°C to +40°C.
The maximum moisture content of the air supplied to the recuperator shall not exceed 19g/kg p.s. (at the temperature of
+30°C and relative humidity of 70%).
CAUTION!
Recuperators
must
not
be
installed
in
explosive
atmospheres.
