Operation and Maintenance Manual
OnyX Pride Recuperators February 2019
Frapol Sp. z o.o. reserves the right to introduce changes without any prior notice.
Page
46
•
Do not expose to direct weather conditions (rain, sunlight) and vibrations greater than those typically encountered
during transport.
•
Do not use it in an environment, in which vapour condensation is present, and do not expose it to water.
•
The storage and transport temperatures must not exceed the range of -25°C to 50°C.
•
It should be installed in a dry living space.
9.
Disassembly
and
disposal
of
the
device
DISASSEMBLY
The device must be disassembled by qualified personnel, in accordance with applicable safety regulations. Every effort
should be made to recover any substances present in the unit, to avoid damage to property and contamination of the
surrounding area.
DISPOSAL
The unit must be disposed of by a specialist agency. All materials used in the unit must be disposed of or recovered, in
accordance with the regulations in force. The devices are made of the following materials:
•
Plastic materials: PA6, EPDM, Polyethylene, Rubber.
•
Metal materials: galvanized steel, stainless steel, aluminium, copper (recoverable and recyclable).
•
In addition, the devices are equipped with fans with permanent magnet motors and electronic components.
At the end of their service life, these components must be dismantled with commonly available tools, such as a screwdriver,
a cross-thread screwdriver, or a set of flat wrenches 6-22mm.
After dismantling, these components shall be placed in containers dedicated to WEEE (Waste
Electrical & Electronic Equipment), in accordance with Directive No. 2012/19/EU.
Other elements of the housing and the components of the unit should be sorted by the type of material (metal, plastic, other)
and placed in containers intended for a corresponding type of waste.
10.
Terms
of
warranty
This warranty is valid in the Republic of Poland. FRAPOL Sp. z o.o. provides warranty and post-warranty service of the device.
The warranty covers free-of-charge repairs, within
24
(twenty-four)
months
from the date of purchase. The Guarantor
undertakes to process each claim, within 14 (fourteen) days from the date it has been filed.
10.1
Validity
of
the
Warranty
Card
The warranty card is considered valid, if:
•
it contains the installer's seal and the serial number of the device assigned by the manufacturer,
•
it bears the vendor's stamp, the signature and date of sale of the device.
The validity of the warranty depends on the technically correct start-up of the unit (in accordance with the Operation and
Maintenance Manual). All electrical connections should be made by an installer, who is familiar with the requirements of
this OMM and has a licence from the Association of Polish Electrical Engineers - at least up to 1kV. The so-called EQUIPMENT
HANDOVER REPORT is mandatory - it is attached to the Operation and Maintenance Manual. The report should be sent by
email, within 30 days from the start-up date, to serwis
frapol.com.pl, or by post, to the company
’
s address, with a note
“technical maintenance”. Failure to send the equipment handover report will void the warranty.
To be able to pursue warranty claims, it is required to submit a properly filled warranty card, supplemented with a filled-in
Equipment Handover Report, and a proof of purchase (a receipt or an Invoice).
10.2
Exclusions
The Customer may lose the right to warranty claims, when a technical service centre of Frapol Sp. z o.o. establishes that
defects occurred not by fault of the manufacturer, but resulted from:
•
modifications to the design of the unit
•
unauthorized repairs carried out by third parties
•
the use of non-original wiring or its modification
•
failing to comply with the user manual (incorrect installation and operation)
•
exposure to environmental factors
•
damage due to over-voltage or atmospheric discharges
•
damage caused by negligent maintenance
•
accidents or random events
