Chapter 2 Working with DaqLab
59
To change the password:
a. Click
Logger
on the menu toolbar, and then click
Calibration > Calibrate
Sensors
.
b. Click
Change Password
to open the
Change Password
dialog box.
c. Enter the current password in the
Current Password
text box.
d. Enter the new password in the
New Password
text box.
e. Enter the new password a second time in the
Confirm New Password
text box to
confirm your new password.
f. Click
OK
.
Note:
The password must include at least 4 characters and is
case sensitive.
6. Calibration Procedure
Two-point Calibration
Measure two reference values
a. Connect
DaqPRO
to the PC.
b. Click
Logger
on the menu bar, then click
Calibration > Calibrate Sensors.
c. Enter the calibration password, and then click
OK
.
d. Choose a sensor from the
Select sensor
drop-down menu and click
OK
to open
the
Sensor calibration
dialog box:
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
