54
Chapter 2 Working with DaqLab
Data Map. To display the comment on
DaqPRO
's LCD select the
System information
menu (refer to
page 16).
The comment and the serial number will also be displayed in prints and exported files.
Note
: the comment can include up to 32 characters.
To add a comment:
1. Connect
DaqPRO
to the PC.
2. Click
Logger
on the menu bar, then click
Set comment
.
3. Click
the
Comment
text box and type a comment (e.g. its location).
4. Click
OK
to upload the edited notes to
DaqPRO
.
2.5.6.
Edit DaqPRO’s Notes
1. Connect
DaqPRO
to the PC.
2. Select
Edit notes
from the
Logger
menu to open the
Notes
dialog box with the
DaqPRO
’
s
current notes downloaded to the window.
Figure 16: Edit notes dialog box
From this dialog, you can edit, delete, or write new notes.
Note:
A note is limited to 140 characters and a maximum of 3 notes can be stored in
DaqPRO
at any
time.
3. Use the arrow buttons to move to the next note, or to the previous one.
4. Click
OK
to upload the edited notes to
DaqPRO
.
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
