12 Chapter
1
DaqPRO
b. Press
the
Enter
button
to enter the setup menu:
→
In – 1 Voltage 0–10V
In – 2 Empty
In – 3 Empty
In – 4 Empty
RATE = Every sec
SAMPLES = 500
DISPLAY = numeric
c. Use
the
Forward
and
Backward
arrow buttons to select the sensor
in input 1 and then press the
Enter
button
. The arrow indicator will move to
the second input.
d. Repeat this procedure with all the sensors you plugged in.
e. After the fourth sensor has been selected, the screen will list the next 4 sensors:
→
In – 5 Empty
In – 6 Empty
In – 7 Empty
In – 8 Empty
RATE = Every sec
SAMPLES = 500
DISPLAY = numeric
You can press the
Enter
button in the last input if you want to go back to the first
input.
f.
When you’ve finished selecting the sensors press the
Escape
button
. The
arrow indicator will point to the Rate command.
www.esis.com.au
Ph 02 9481 7420
Fax 02 9481 7267
