Ford TOURNEO CONNECT, Руководство пользователя

Страница: 291 / 437

Fig. 166 Refilling AdBlue with a pump noz-
zle.
1 AdBlue ® filler neck cap.
2
Refill bottle.
3 AdBlue ® pump nozzle.
Preparing for refilling
The AdBlue
®
filler neck is located behind
the tank flap next to the tank filler neck for
fuel → Fig. 164
1
.
1. Park the vehicle on a flat surface and
switch off the ignition.
2. Close the left sliding door.
3. Open the tank flap.
Vehicles with tank flap collision protec-
tion:
a clicking noise can be heard when
the tank flap is opened. This is normal
and is not an indication of a technical
problem. The
left sliding door is blocked
and cannot be opened when the tank
flap is open. The sliding door can be
opened again only when the tank flap
has been closed.
Vehicle without tank flap collision pro-
tection: keep the left sliding door closed
during refilling → .
4. Unscrew the AdBlue ®
filler neck cap.
5. Place the cap in the opening provided
on the tank flap.
When a message about the AdBlue
®
level
is shown on the instrument cluster display,
refill with at least the minimum refill quan-
tity. A lower refill amount is not sufficient.
Use only AdBlue ® that complies with
standard ISO-22241-1 .
Refilling with a refill bottle
Observe the use-by date, instructions and
information provided by the manufacturer
on the
refill bottle.
1. Unscrew the cap on the refill bottle.
2. Place the
refill bottle on the AdBlue
®
filler neck and screw the refill bottle
hand-tight → Fig. 165 .
3. Do not squeeze the refill bottle to pre-
vent it from being damaged.
4. Press the refill bottle in the direction of
the tank filler neck and hold the refill
bottle in this position
→
Fig. 165
2
.
5. Add at least the minimum refill quantity
shown on the instrument cluster.
6. The AdBlue ®
tank is full as soon as no
more AdBlue ® flows out of the refill
bottle
→
.
7. Do not squeeze the refill bottle to avoid
overfilling the tank.
8. Unscrew the refill bottle.
Refilling with a pump nozzle
The AdBlue
®
tank can be refilled at all
AdBlue
®
pumps.
Do not fill the vehicle with fuel and AdBlue
®
at the same time.
The AdBlue
®
nozzle functions in the same
way as a fuel nozzle.
1. Hold the AdBlue
®
nozzle so that the
handle is facing down in order to ensure
optimum
filling
→
Fig. 166
3
.
2. Add at least the minimum refill quantity
shown on the instrument cluster.
3. The AdBlue ®
tank is full when the noz-
zle clicks off for the first time
→
.
4. Do not continue filling to avoid overfill-
ing the AdBlue
®
tank.
Filling with a canister
1. Remove the cap on the canister.
2. Use the integrated spout to
fill the
AdBlue
®
tank.
3. Add at least the minimum refill quantity
shown on the instrument cluster.
4. The AdBlue
® tank is full when AdBlue ®
has been filled up to the level of the
Emission control 289
2KF012
720AB