Ford TOURNEO CONNECT, Руководство пользователя

Страница: 253 / 437

Switching the activation word on and
off
If the activation word is switched off, the
voice control cannot be activated via the
activation word.
1. Tap
HOME
Voice control Activa-
tion word .
Saying and recognising the activation
word
The activation word is: OK Ford.
Prerequisite
✓
The Activation word is activated in the
settings.
Troubleshooting
Please refer to and on page 219.
Voice control does not react
— Voice control is not available in your lan-
guage.
— Set the correct language in the Infotain-
ment system.
— Start voice control with the activation
word or the voice control button on the
multifunction steering wheel.
— Voice commands are not recognised due
to a system error. Ask a suitably qualified
workshop.
Voice control provides inappropriate
answers
— The voice control system has interpreted
the question incorrectly.
— Speak the voice command again clearly.
Voice control does not perform function
— The function cannot be performed by
voice control.
— The function cannot be performed in all
languages. Suggestions for voice com-
mands in the set language can be found
in the Infotainment system.
— Settings in the function prevent it from
being switched on or performed.
— The voice control system has not under-
stood the voice command.
— Insufficient data is available.
Wired and wireless connec-
tions
Introduction
Some external devices can be connected
to the Infotainment system by cable and
wireless connections present in the vehicle
(if installed).
The type and number of cable and wireless
connections
differ by equipment package
and country. The connections may also be
different within a model series or in special-
edition models.
In the case of cable connections, use only
the original device connecting cables or, if
available, the factory-supplied connecting
cables for your vehicle.
If the adapter or plug on the connecting ca-
ble cannot be inserted, check the angle of
insertion and the connections.
NOTICE
Use only suitable and undamaged con-
necting cables for wired connections.
·
When inserting the adapter and plug of
the connecting cable into the appropriate
port, ensure that they are correctly posi-
tioned and apply only light pressure. Ap-
plying too much pressure may damage
both the unit connection and the adapter
or plug of the connecting cable.
·
Make sure that the connection cable is
not pinched or kinked.
·
Do not use unsuitable or damaged con-
nection cables. This could result in mal-
functions and damage to the unit.
If a connected device is not recog-
nised, disconnect all devices and con-
nect the device again. If necessary, check
that the connecting cable you are using is
working properly.
If a connected device malfunctions,
restart the device. In some cases this
will remedy the fault.
Wired and wireless connections 251
2KF012
720AB