Ford TOURNEO CONNECT, Руководство пользователя

Страница: 94 / 437

there is a fault in the electric windows. Go
to a qualified workshop.
Global opening of the windows using
the vehicle key in the door lock is pos-
sible only if the vehicle was unlocked previ-
ously with the vehicle key.
Electric window roll-back func-
tion
The roll-back function of the electric win-
dows can reduce the risk of crush injuries
when the windows are closed.
If a window cannot close properly due to
stiff movement or an obstacle, the window
will open again immediately
→
.
1. Check to see why the window has not
closed.
2. Try to close the window again.
If closing of the window is interrupted
again, the roll-back function will be deacti-
vated for several seconds.
If the window still cannot be closed, it will
stop at the corresponding position
→
.
The window will close without roll-back
function if the button is pressed again with-
in a few seconds
→
.
Please go to a suitably qualified workshop
if the window still cannot be closed.
WARNING
Closing the electric windows without the
roll-back function can cause serious inju-
ries.
·
Always take care when closing the
electric windows.
·
There must never be anyone in the
movement path of the electric win-
dows, particularly if the windows are
closed without roll-back function.
·
The roll-back function does not prevent
fingers or other body parts from being
pressed against the window frame and
sustaining injury.
The roll-back function is also active
for convenience closing of the win-
dows with the vehicle key.
Troubleshooting
One-touch opening and closing do not
work
If the 12-volt vehicle battery has been dis-
connected or discharged when the win-
dows were not fully closed, the one-touch
opening and closing function does not work
and must be reactivated:
1. Switch on the ignition.
2. Close all windows and doors.
3. Pull and hold the button for the respec-
tive window for several seconds.
4. Release the button.
5. Pull and hold the button again.
The one-touch opening and closing func-
tion is now ready for operation again.
The automatic electric window functions
can be reactivated either individually or for
several windows at the same time.
Window cannot be closed
1. Check whether there is an obstacle in
the movement path.
2. Try to close the window again within
a few seconds by pulling and holding
the button.
The roll-back function is then deactivated
for a small operating range of the closing
path. The roll-back function will be activa-
ted again if the closing operation takes lon-
ger than a few seconds.
The window will then stop if movement is
again
stiff or if there is an obstacle and
opens automatically again.
1. If the fault persists, the system should
be checked by a suitably qualified
workshop.
Touch panels do not react as expected
Moisture, dirt and grease can impede the
functioning of the touch panels.
— Always keep touch panels clean and dry.
92 Opening and closing