Ford TOURNEO CONNECT, Руководство пользователя

Страница: 24 / 437

Vehicles without multifunction steering
wheel: If any priority 1 warning reports are
being displayed, you will be unable to open
any menus. Some warnings can be con-
firmed and hidden with the button
→ Fig. 11
1
.
Views in the display area
The main display can be changed by press-
ing the
→
Fig. 10 button. The following
views can be shown in the display area:
After the engine is switched off:
display with information on the vehi-
cle status, e.g. mileage.
Display with digital speed display.
Classic display of round instru-
ments.
Navigation map and route
guidance information.
Display of active
driver assist systems.
Alternative displays, e.g. sport dis-
plays, can be shown here, depending
on equipment.
Situation-dependent information, e.g.
navigation information, is displayed as
pop-ups.
Selecting a menu or information dis-
play
Vehicles with multifunction steering wheel:
1. Switch on the ignition.
2. Press the
→
Fig. 10 button, several
times if required, if a message or the ve-
hicle pictogram is displayed.
3. Press the
→
Fig. 10 or
→
Fig. 10
button to display the menus and to
browse through a menu.
4. To open the menu or information dis-
play shown, press the button
→
Fig. 10 or wait until the menu or infor-
mation display opens automatically af-
ter a few seconds.
Vehicles without multifunction steering
wheel:
1. Switch on the ignition.
2. Press the
→
Fig. 11
1
button,
several times if required, if a message
or the vehicle pictogram is displayed.
Summary
Basic
Classic
Navigation
Driver assist systems
Special
3. Hold down the
→
Fig. 11
2
rocker
switch to display the menus
→
page 23 or to return to the menu se-
lection from a menu or an information
display.
4. Press the rocker switch at the top or
bottom to scroll through the menus.
5. To open the menu or information dis-
play shown, press the but-
ton
→
Fig. 11
1
or wait until the menu or
information display opens automatical-
ly after a few seconds.
Selecting secondary displays
The secondary displays can be configured
or hidden independently of each other. Var-
ious driving data, navigation information or
information on audio playback or the mo-
bile phone interface can be shown in the
secondary displays.
1. Select the right or
left secondary dis-
play area with the
→
Fig. 10 or
→
Fig. 10 buttons on the multifunction
steering wheel.
2. Select the desired secondary display
with the
→
Fig. 10 or
→
Fig. 10 ar-
row buttons.
3. Confirm the selection with the
→
Fig. 10 button.
Adjusting settings in menus
Vehicles with multifunction steering wheel:
1. Press the or arrow button in the
displayed menu until the desired menu
option is highlighted.
A frame appears around the selected
option.
2. Press the button
→
Fig. 10 to make
the required changes.
A tick indicates that the relevant
function is switched on.
Vehicles without multifunction steering
wheel:
1. In the displayed menu, press the rocker
switch → Fig. 10 , → Fig. 10 at the
top or bottom until the desired menu
option is marked.
A frame appears around the selected
option.
22 Driver information