Ford TOURNEO CONNECT, Руководство пользователя

Страница: 25 / 437

2. Press the
button
→
Fig. 11
1
to
make the required changes.
A tick indicates that the relevant
function is switched on.
Returning to the selection menu
Vehicles with multifunction steering wheel:
1. Press the or
→
Fig. 10 button.
Vehicles without multifunction steering
wheel:
1. Select the Back menu option.
Button on the multifunction steer-
ing wheel
— To switch between the current and previ-
ous menus, press the button
→
Fig. 10 .
— Press and hold the
→
Fig. 10 button
to show or hide secondary displays.
Navigation map in the digital instru-
ment cluster
Depending on equipment, the digital instru-
ment cluster may display a detailed navi-
gation map. To display the map, select the
Navigation display area in the digital in-
strument cluster by pressing the
→
Fig. 10 button on the multifunction steer-
ing wheel.
The size of the navigation map can be con-
tinuously adjusted.
1. To zoom in and out, press the or
→
Fig. 10 arrow button on the multi-
function steering wheel.
If warning messages about malfunc-
tions are displayed when the ignition
is switched on, it may not be possible to
adjust some settings or display information
as described. If the fault persists, go to
a correspondingly
qualified workshop.
WARNING
If the driver is distracted when driving, this
can cause accidents and serious injuries.
·
Never operate the instrument cluster
while the vehicle is in motion.
·
Adjust all settings in the instrument
cluster and Infotainment system only
when the vehicle is stationary.
Information displays on the digi-
tal instrument cluster
The range of content and layout of the me-
nus and displays depend on the vehicle
electronics and the level of vehicle equip-
ment.
Correspondingly
qualified workshops can
program and modify other functions de-
pending on the vehicle equipment level.
Some menu options can only be called up
when the vehicle is stationary.
Possible displays in the main display
area of the digital instrument cluster
Various information can be displayed in the
main display area of the digital instrument
cluster
→
page 20 depending on the vehi-
cle equipment:
— Outside temperature.
— Date and time
→ page 33.
— Recognised road signs of the road sign
recognition function
→
page 36.
— Driver assist systems.
— Gear-change indicator
→ page 134.
— Open doors, bonnet and boot lid.
— Speed warning for winter tyres.
— Maximum speed limit.
— Radiator fan run-on.
— Engine code (EC).
— Radio and navigation information.
— Range.
— Service interval display
→
page 32.
— Auto StartStop status
→
page 145.
— Economical driving mode .
— Warning and information messages.
— Selector lever position for automatic
transmission.
Outside temperature display
If the outside temperature falls below
4°C (39°F), the temper-
ature display also shows the
snowflake
symbol . This symbol remains lit until the
outside temperature rises above +6°C
(+43°F).
Digital instrument cluster 23
2KF012
720AB