Ford TOURNEO CONNECT, Руководство пользователя

Страница: 134 / 437

Fig. 95 Replace the button cell in the re-
mote control.
Replacing the button cell
1. Insert a suitable tool, e.g. a screwdriver,
in the recess on the housing of the re-
mote control in the direction of the ar-
row
→ Fig. 95 .
2. Using the tool, lever off the battery cov-
er in upward direction until the housing
catches are released.
3. Slide the battery cover forwards slightly
in the direction of the arrow.
4. Remove the battery cover.
5. To remove the button cell, carefully in-
sert a screwdriver, for example, in the
recess on the button cell.
6. Lever up the button cell with the screw-
driver until the button cell is released
from the holder.
7. Remove the button cell.
8. Insert a new button cell of the same
type so that it engages in the holder.
Observe the information on the inside
of the battery cover about the polarity
of the button cell.
9. Place the battery cover on the remote
control and press it gently until the bat-
tery cover clicks into place.
DANGER
If you swallow a button cell, or if it enters
your windpipe, it can cause serious or
even fatal injuries within a very short time
due to choking or internal burns.
·
Seek immediate medical assistance if
you suspect that someone has swal-
lowed a button cell.
·
Do not use the remote control if you
cannot close the battery cover.
·
Always keep the remote control and
key ring with button cells out of the
reach of children.
NOTICE
Using unsuitable button cells can damage
the remote control.
·
Replace a discharged button cell only
with a new button cell of the same volt-
age rating, size and
specification.
·
Make sure that the button cell is inserted
properly so that the polarity is consistent.
Dispose of discharged button cells in
an environmentally-friendly way.
The button cell in the remote control
may contain perchlorate. Observe the
legal requirements for disposal.
132 Heating and air conditioning system