Ford TOURNEO CONNECT, Руководство пользователя

Страница: 367 / 437

spoons of neutral soap diluted in one litre
of water.
— Never use leather care products, sol-
vents, floor wax, shoe cream, stain re-
mover or similar.
— Never use a high-pressure cleaner, steam
cleaner or coolant spray.
Natural leather
— Remove fresh soiling using a cotton cloth
and a mild soap solution consisting of
a maximum of two tablespoons of neu-
tral soap diluted in one litre of water. Do
not allow
fluids to seep into the seams.
— Use a suitable leather cleaner to remove
soiling caused by ballpoint pens or nail
varnish, for example.
— Treat dried stains with a suitable leather
cleaner.
— In the case of grease-based soiling, e.g.
oil, remove the fresh stains using an ab-
sorbent cloth.
— Apply a leather care product for seating
furniture regularly and each time after
the leather is cleaned. If the vehicle is left
standing outside for an extended period,
cover the leather to protect it from direct
sunlight.
— Never treat leather with solvents, floor
wax, shoe cream, stain remover or simi-
lar.
Plastic parts
— Clean with a soft, damp cloth.
— If stubborn soiling cannot be removed
with a mild soap solution consisting of
a maximum of two tablespoons of neu-
tral soap diluted in one litre of water,
a solvent-free plastic cleaner can be
used.
Trim parts, trim strips made of chrome,
aluminium or stainless steel
— Clean in a dust-free environment using
a clean, soft cloth and a mild soap solu-
tion consisting of a maximum of two ta-
blespoons of neutral soap diluted in one
litre of water.
— Treat anodised surfaces with a suitable
chrome and aluminium care product.
Controls
1. Use a soft paintbrush to remove coarse
soiling and dirt that is difficult to reach.
2. Use a clean, soft cloth and a mild soap
solution consisting of a maximum of
two tablespoons of neutral soap dilu-
ted in one litre of water. Fluids must not
be allowed to enter the controls
→
.
NOTICE
The controls may be damaged if fluids en-
ter them.
Displays and screens
Do not clean the instrument cluster display
and Infotainment system screen when they
are dry.
1. Switch
off the Infotainment system
temporarily to clean it.
2. Use a suitable cleaning cloth with some
water, a suitable glass cleaner or LCD
cleaner.
Rubber seals
— Clean with a soft, lint-free cloth and
plenty of water.
— Treat regularly with a suitable rubber
care product.
Seat belts
1. Pull out the seat belt completely and
leave the belt extended.
2. Remove coarse dirt with a soft brush.
3. Clean the seat belt with a mild soap
solution consisting of a maximum of
two tablespoons of neutral soap dilu-
ted in one litre of water.
4. Allow the belt fabric to dry completely
before allowing it to retract again.
WARNING
Incorrect cleaning can damage the seat
belts, anchorages and belt retractors.
·
Never attempt to modify or remove the
seat belts for cleaning.
·
Never clean the seat belts and their
components with chemical agents.
·
Do not use any caustic fluids, solvents
or sharp objects.
Vehicle care 365
2KF012
720AB