Ford TOURNEO CONNECT, Руководство пользователя

Страница: 114 / 437

if necessary and have the vehicle battery
checked by a correspondingly qualified
workshop.
Coming Home and Leaving Home
function (orientation lighting)
The Coming Home and Leaving Home
function lights up the area immediately
surrounding the vehicle when you get in or
out of the vehicle in darkness.
The Coming Home and Leaving Home
function is controlled automatically by
a light sensor.
The
switch-off delay can be set and the
function activated or deactivated in the ve-
hicle settings in the Infotainment system
→
page 34.
Activating the Coming Home function
1. Switch off the ignition.
The Coming Home lights are switched
on when automatic lighting control
is switched on and the light sensor de-
tects
darkness .
The switch-off delay starts when the
last vehicle door or the boot lid is
closed.
Deactivating the Coming Home func-
tion
1. Automatically after the set switch-off
delay has elapsed.
Or: automatically if a vehicle door or
the boot lid is still open approximately
30 seconds after switch-on.
Or: press the light switch as often as
necessary until the setting is dis-
played in the instrument cluster.
Or: switch on the ignition.
Activating the Leaving Home function
1. Unlock the vehicle when automatic
lighting control is switched on and
the light sensor detects darkness .
Deactivating the Leaving Home func-
tion
1. Automatically after the switch-off de-
lay.
Or: lock the vehicle.
Or: press the light switch as often as
necessary until the setting is dis-
played in the instrument cluster.
Or: switch on the ignition.
Headlights
Headlight range control
Headlight range control can be used to ad-
just the low beam light cone to the vehicle
load level. This gives the driver the best vis-
ibility possible and means that oncoming
traffic will not be dazzled
→
.
The headlight range can be adjusted in the
Infotainment system, depending on the
equipment.
Manual headlight range control
Adjusting in the Infotainment system:
1. Press the
button or function but-
ton.
2. Tap the
Vehicle
and function buttons
to open the Vehicle settings menu.
3. Tap the
Headlights
function button to
open the Light settings menu.
4. Tap the
Headlight range control
function
button.
5. Tap the required setting value (typical
vehicle load level).
Settings in the
Infotainment
system
Front seats occupied and
luggage compartment
empty.
All seats occupied and
luggage compartment
empty.
112 Lights