AUTOMATIC CLIMATE
CONTROL
Note:
For general information on climate
control, please consult the main handbook
for your vehicle. This section of the
navigation handbook only describes the
unique climate control functions integrated
within the unit.
For an overview of the climate control
buttons See
Navigation unit overview
(page 30). Buttons will be referred to using
the letters
A
to
Y
as denoted in the overview
diagram.
Climate button
Press button
M
to access the climate
touchscreen mode from any other mode
the navigation unit is in.
Touch the fan icon button to access
ventilation options.
Touch the thermometer icon button to
access temperature setting options.
Touch the off button to turn climate
control off. This sets the blower speed to
zero, closes air outlets and turns the air
conditioning off.
Note:
The touchscreen buttons allow a
more detailed operation and setup for
climate options, however most climate
settings can be set via the hard keys
I
to
S
.
Setting the temperature
Rotate the buttons
Q
and
K
for the left and
right hand sides of the vehicle respectively.
Alternatively, you can also set the
temperature via the touchscreen:
1.
Press the CLIMATE button
M
.
2. Touch the thermometer icon button.
3. Adjust the temperature for the desired
part of your vehicle using the arrow
buttons.
Note:
For vehicles with triple-zone climate
control, you can change the rear zone
temperature only via the touchscreen.
Mono mode
In mono mode, the temperature settings
for both the driver’s and passenger’s side
are linked. If you adjust the temperature
using the rotary control on the driver’s side,
the settings will be adjusted to the same
setting on the passenger’s side. In mono
mode,
MONO
will appear in the climate
display. As long as MONO is activated, any
changes of the temperature using the
touchscreen arrows will set the
temperature for the whole vehicle.
1.
Press the CLIMATE button
M
.
2. Touch the thermometer icon button.
3. Touch the MONO button to turn on or
off.
To switch mono mode off
Select a temperature for the passenger’s
side with the rotary control on the
passenger’s side. Mono mode will switch
off and
MONO
will disappear from the
climate display. The temperature for the
driver’s side will remain unchanged. You
can now adjust the driver and passenger
side temperatures independently of each
another. The temperature settings for each
side are shown in the display on the
bottom line of the screen. You can set a
temperature difference of up to 4ºC.
Note:
If you set a temperature difference
of greater than 4°C, the temperature on the
other side will be adjusted so that the
difference remains 4°C.
Note:
If you set one of the sides to HI or LO,
both sides will be set the same.
Note:
If you press and hold button
Q
, this
will switch between mono and dual zone
mode.
65
Navigation climate control - Vehicles With: Touchscreen
Display
Содержание CG3548en
