PRINCIPLE OF OPERATION
Voice recognition enables operation of the
system without the need to divert your
attention from the road ahead in order to
change settings, or receive feedback from
the system.
Whenever you issue one of the defined
commands with the system active, the
voice recognition system converts your
command into a control signal for the
system. Your inputs take the form of
dialogues or commands. You are guided
through these dialogues by
announcements or questions.
Please familiarise yourself with the
functions of the navigation system before
using voice recognition.
Note:
If the Bluetooth and Voice Control is
used for an extended period of time when
the vehicle is stationary, make sure that the
engine is running to avoid draining the
battery.
Supported commands
The voice control system allows you to
control the following vehicle functions:
•
Phone
•
Radio
•
CD Player
•
CD Changer
•
Climate Control
•
Navigation system
•
System settings.
Note:
The voice control system is language
specific. If you require the system to operate
in another language please make required
change through the system settings menu.
General activation of the voice
recognition system
Voice control is activated by a short press
on the remote control voice button. All
audio sources shall be muted (paused in
the case of CD/MP3/CD changer
playback).
System response
As you work through a voice session the
system will prompt you with a beep tone
each time the system is ready to proceed.
Do not try to give any commands until the
beep tone has been heard.
If you are not sure how to continue say
"HELP" for assistance or "CANCEL" if you
do not wish to continue.
The "HELP" function provides only a
subset of the available voice commands.
Detailed explanations of all possible voice
commands can be found on the following
pages.
Voice commands
All voice commands should be given using
a natural speaking voice, as if speaking to
a passenger or on the phone. Your voice
level should be dependant on the
surrounding noise level inside or outside
the vehicle but do not shout.
USING VOICE CONTROL
System operation
The content of usable voice commands
are given in the following lists. The tables
show the correct user voice commands for
each available function.
< >
indicates a number or stored name tag
to be inserted by the user.
51
Navigation voice control - Vehicles With: Touchscreen
Display
Содержание CG3548en
