40
MENU
Setting
Description
NAME TYPE
Selects a display type for the destination, source
and level name. (See Sec. 5-4-3-1.)
TENKEY MOD
ENTER
DIRECT
Selects how to confirm changes in Ten-key mode.
ENTER
: Enter a value and press the
ENTER
button on the displayed Ten-key keypad
to confirm.
DIRECT
: A value is confirmed when a value is
entered using the Ten-key keypad.
TENKEY NO
0
1
Selects
0
or
1
for the Ten-key start point.
SALVO CLR
Clears a button-assigned Salvo.
BTN ASSIGN
Assigns functions to user-assignable buttons. (See
Sec. 5-4-3-2.)
EXIT
Exits the Setting Mode menu.
*
Do not turn off the remote control unit until the
BUSY
indicator changes from orange to
unlit. Otherwise, settings may not be applied.
5-4-3-1. NAME TYPE
This menu selects a name display type for destination, source and level buttons.
Turn and press
CONTROL
to select and confirm a button group from destination, source and
level buttons.
Turn
CONTROL
to select a display type, then press the knob to confirm the selection.
Display type
Description
Example indication
DST
SRC
LEVEL
PHY NUM
Physical number display
ASCII
Ascii character display
(Alphanumeric characters and symbols)
KANJI
2-byte character code including 1-byte
character code
(Unselectable for LEVEL)
*
When using 2-byte characters:
Up to 8 characters (including one-byte characters) on MFR-18RUA/39RUA/16RUTA/
8RUA units
Up to 4 characters (including one-byte characters) on MFR-18RU/39RU units.
*
Up to 14 characters when using only one-byte characters.
SETTING>NAME TYPE
DST BTN :PHY NUM <ENT>
SETTING>NAME TYPE
DST BTN :PHY NUM <ENT>
