FOR-A MFR-16, Руководство по эксплуатации

Страница: 43 / 90

43
Setting Mode menu items are as shown below.
MENU
indication
Description Reference
NETWORK
Changes the IP address of the remote control unit and
displays the PC-LAN network information.
5-4-4-1
VER/ALARM Displays version and alarm information. 5-4-4-2
DEFAULT
Changes the default settings that are loaded when the
remote control unit is powered on.
5-4-4-3
BUTTON
ASSIGN
Assigns functions to user-assignable buttons. 5-4-4-4
INHIBIT Enables/disables the INHIBIT function for channels. 5-4-4-5
NAME TYPE
Selects the display type for Destination, Source and
Level.
5-4-4-6
BRIGHTNESS Sets the brightness of buttons. 5-4-4-7
RU-RU
CONNECT
Configures link systems for multiple remote control units. 5-4-4-8
TENKEY Sets TENKEY (Ten-key keypad) operation. 5-4-4-9
PAGE Changes PAGE settings. 5-4-4-10
SALVO CLEAR Clears stored salvo data in buttons. 5-4-4-11
5-4-4-1. NETWORK
The following submenus are available in NETWORK setting mode.
Submenu Description
RU NETWORK Changes the remote control unit IP address and displays the
network information.
PC-LAN NETWORK Displays the PC-LAN port network settings.
PC-LAN REBOOT Restarts the PC-LAN port.
* Disabled if connecting to MFR-4000 units.
NETWORK > RU NETWORK
Menu item Description
IP Displays and changes the remote control unit IP address. The lower 8
bits (the fourth byte) represent the Unit ID.
MASK Displays the remote control unit subnet mask.
UNIT NAME Displays the remote control unit name.
To Change IP Address:
1. Hold down the button where the number to be changed is displayed. The button
blinks.
2. Turn CONTROL to change the number.
3. Repeat 1. and 2. to change the IP address.
4. Hold down the current DEST button to confirm the change. The remote control unit
automatically restarts.
NETWORK > PC-LAN NETWORK
Menu item Description
IP Displays the PC-LAN IP address.
MASK Displays the PC-LAN subnet mask.
GW Displays the PC-LAN Default Gateway IP address.