FOR-A MFR-16 Скачать руководство пользователя страница 74

Страница: 74 / 90

On the remote control unit:



LOCK LED illuminates
Orange: LOCK OTHER was enabled by itself.
Red:

LOCK OTHER was enabled by other unit.

Red:

LOCK ALL was enabled by any unit.



The

LOCK

button is highlighted (background illuminates)



LED and LCD colors of locked current destination buttons are changed to those set under

LockButtonColor

in the [Web-Based Control:

RU Settings

page] (MFR-40/ 18/ 39RU

and 16RUTA)

To check the

LOCK

status, press the current destination button.

The MENU display shows the LOCK status and the ID number of the unit that has issued the
LOCK command.

The

LOCK

button and LOCK LED on the remote control unit flash if any inhibited operation

such as selecting a source channel is performed when

Lock Other

(or

Lock All)

buttons are

enabled and assigned.



LOCK GROUP

The

LOCK OTHER

function also enables Group

LOCK OTHER

, which allows RU crosspoint

switching only within the same group, and locks RU crosspoint switching in other groups. Any
RU in the same group can lock or release the

LOCK OTHER

command.

LOCK ALL

disables

crosspoint switching from all remote control units and can be unlocked only by remote control
units in the same group.

<LOCK GROUP Setting Example>

This example creates the following three groups from five RU units as shown below using the
Unit ID and Group ID numbers.

Open the [Web-Based Control: Lock Destination page]. Add RU [100], RU [101] and
RU [102] to Group A.

Add RU [103] and RU [104] to Group B.

Once an RU is added to a group, the

LOCK OTHER

LOCK ALL

button on the RU changes

to a

Group LOCK OTHER

LOCK ALL

button.

DST: 8 [DST8 ]
LK-ID: 103[OTHER PANELS]

LOCK OTHER ON

DST: 8 [DST8 ]
LK-ID: 103[ALL PANELS]

LOCK ALL ON

DST: 8 [DST8 ]
LK-OFF [NOT LOCKED ]

LOCK OFF

If LOCK OTHER or LOCK ALL is ON:

RU [102]

RU [103]

RU [100]

RU [101]

RU [104]

RU [105]

Group A [200]

Group B [201]

Содержание MFR-16



























































































Результаты поиска

Содержание MFR-16

Отзывы:

Похожие инструкции для MFR-16

Бренды по названию

Популярные бренды

FOR-A MFR-16, Руководство по эксплуатации

Результаты поиска

Содержание MFR-16

Отзывы:

Похожие инструкции для MFR-16

Бренды по названию

Популярные бренды