11
2-2. Assigning Functions to Buttons
This section describes the procedure how to assign Destination Function to the MFR-39RU button
1 as an example.
1.
Click
System Settings
.
2.
Click
MFR-39RU
to open the tree. Click to select
Assign Function
to display the menu page.
3.
Click the button 1 on the
Remote Control Unit Image
.
4.
Select 1 under
Page
.
5.
Select Destination under
Function
.
6.
Set parameters in the
Parameter Setting
pane.
Logical No.
(Channel no.),
Name
(Destination name) and
Level
(Level no.) are to be set here.
7.
Click
Send
.
IMPORTANT
After clicking
Send
, do not turn off the remote control unit until the BUSY indicator, which lights
orange, goes off since the system is writing to Flash. (About 2 minutes max.)
See Sec. 4
“Web-Based Control” for details.
Remote Control
Unit Image
Parameter Setting Pane
