42
Function
Parameter
Note
PAGE_Grp-All: ON
(ON / OFF)
PAGE_Grp-A: ON
(ON / OFF)
PAGE_Grp-B: ON
(ON / OFF)
PAGE_Grp-C: ON
(ON / OFF)
PAGE_Grp-D: ON
(ON / OFF)
SETTING: ON
(ON / OFF)
LOCK
LOCK[S]: OTHER
(NONE / OTHER / ALL / LOCAL)
Short press to LOCK function.
DEST: XX
(CURRENT: Locks the current
destination.
/ XX: Destination Channel number to
be locked)
* Effective
for OTHER
and ALL
LOCK[L]: NONE
(NONE / OTHER / ALL / LOCAL)
LOCK function by long press
DEST: XX
(CURRENT: Locks the current
destination.
/XX: Destination Channel number to
be locked)
* Effective
for OTHER
and ALL
TAKE
LEVEL
LEVEL:XXXX
(XXXX: Level)
LINK
TENKEY
SKIP
MODE: FWD
(FWD: Forward / BWD: Backward)
COUNT: XXX
(XXX: Number of channels to skip)
MON-OUT
OUT: X
(X:MONITOR OUT)
*
MFR-5000/
8000 only
O-PREVIEW DEST: XXX
(XXX: Destination channel number)
SALVO
MODE:
MU RECALL
(MU RECALL: Executes the main unit-assigned SALVO
/RU RECALL: Executes the button-assigned SALVO
/RU STORE: Assigns a SALVO to a button)
NO: XXXX
(XXXX: Salvo number)
* Effective for MU
RECALL, and
RU RECALL
5-4-4. Setting Mode Menu (MFR-39RUA)
The current
SRC
button functions as an
EXIT/CANCEL
button used for exiting mode during
Setting
mode.
Use the following procedures to change settings.
Press a button to turn On/Off.
Use
CONTROL
to change values.
1.
Press to select a desired menu item.
2.
Turn
CONTROL
to change its value.
3.
Press
CONTROL
to confirm the setting.
After menu settings, do not turn off the remote control unit until the BUSY indicator changes
from orange to unlit. Otherwise, settings may not be applied.
*
When
Setting
mode is entered by pressing the
SETUP
button, the
BUSY
indicator lights
orange in
Setting
mode. Press the
EXIT/CANCEL
button to exit
Setting
mode. Before
powering off the remote control unit, verify that the BUSY indicator is turned off.
