Fondital Antea 24kW Range, Руководство по установке, использованию и обслуживанию

Страница: 6 / 60

6
QUICK GUIDE OPERATING INSTRUCTIONS
The following instructions will help you to switch the boiler on quickly and regulate it for immediate use.
It is presumed that the boiler has been installed by a qualified installer, it has been commissioned and is ready to operate
correctly.
If any accessories have been fitted on the boiler, these instructions will not cover them.
You will therefore have to refer to the full boiler instructions as well as to the specific instructions for the accessories.
This manual contains full details of how the boiler works, and full operating and safety instructions.
1. Open the yellow handled gas cock installed Under the boiler.
2. Turn the Electrical mains switch installed adjacent to the boiler to ON: the display comes on and shows the function set via the boiler mode
button (fig. 1) and flow water temperature.
3. If you do not wish to activate the heating function press the boiler mode button 3 (fig. 1) until displaying the SUMMER symbol: this will
activate domestic hot water (DHW) only, and the display will show the DHW temperature.
4. If you wish to activate the heating function and domestic hot water, press the boiler mode button (3, fig. 1) until displaying the WINTER
symbol: this will activate both DHW and heating, the display will show the primary flow water temperature.
5. If you wish to activate the heating function press the boiler mode button 3 (fig. 1) until displaying the CENTRAL HEATING ONLY symbol: this
will activate heating function, and the display will show the primary flow water temperature.
6. To adjust the DHW temperature press domestic hot water temperature buttons (1 in fig. 1); then set as required. While regulating, the LCD
displays the temperature setting and the tap symbol flashes.
Boiler mode button
SUMMER symbol
Boiler mode button
WINTER symbol
Domestic hot water temperature buttons
Central heating water temperature buttons
8. Set the desired temperature on the (optional) room thermostat in the building.
The boiler is now ready to operate.
If the boiler shuts down, press boiler reset button (4 in fig. 1). If the boiler does not restart, contact contact the Fondital Helpline UK.
Boiler mode button
CENTRAL HEATING ONLY symbol
7. To adjust the heating water temperature press heating water temperature buttons (6 in fig. 1); then set as required. While the heating water
temperature is being regulated, the LCD displays the temperature setting and the CH symbol flashes.