Fondital Antea 24kW Range, Руководство по установке, использованию и обслуживанию, Страница: 28 / 60

28
4.5.5. Air intake and flue gas discharge system
Flue gas discharge into the atmosphere and air intake/flue gas discharge systems must comply with applicable laws and standards in the
country of installation that are considered as fully referred to herein.
In accordance with BS 5440 Part 1 and BS 5440 Part 2 the boiler is equipped with safety devices checking correct flue gas
discharge.
Should an air/flue gas system malfunction occur, the safety devices shut down the boiler and the LCD will display the E03
code flashing.
It is strictly forbidden to tamper with and/or prevent operation of such safety devices.
Should the boiler repeatedly shut down, it is necessary to have air/flue gas system ducts inspected, as they might be
obstructed or inadequate to flue gas discharge into the atmosphere.
for the air intake/flue gas discharge systems, only specific, fondital approved, condensate acid-resistant pipes and systems
must be used, suitable for condensing boilers.
flue gas discharge pipes are to be installed tilted toward the boiler so that condensate runs toward the combustion chamber,
which is designed for condensate collection and drainage.
Should the above procedure not be possible, it is necessary to install, in condensate stagnation areas, devices designed for
condensate collection and conveying to the condensate drain system.
It is necessary to avoid formation of condensate stagnation areas in the flue gas discharge system, with the exception of the
condensate trap possibly connected to the discharge system itself.
The manufacturer cannot be held responsible for any damage caused by inappropriate boiler installation or operation, modification
to the boiler, or due to non-observance of the instructions provided by the manufacturer or of legislation and standards applicable for
the materials installed.
Installation examples
KEY
A Air intake - S Flue gas discharge - Condensate - Rain
fig.12