4
automatically. (0-120 minutes or no auto shutdown is selectable)
* The transmitter casing is composed of special engineering plastic and pushbutton waterproof
layer. The engineering plastic is featured with wearable, oil-proof, acid-proof, alkaline-proof,
high temperature resistance, anti-UV, water-proof and dust-proof. With the self-developed no
contact cross type and single axis joystick, there is no disadvantage of friction and
non-durability as the operation of direct contact. The operation life and reliability is for a
minimum of 1 million operating cycles.
* The receiver enclosure is composed of 100% aluminum alloy. It may eliminate the static
completely and avoid interference from radio radiation.
*
Relay and proportional joystick output via RS485 interface (optional). It is also applicable
on internet type control.
*
Receiver internal circuit is completely modularized. Including: receiving RF module,
decoding module, relay module, proportional output module, LCD display module and power
module. It is easy for the users to replace and extend.
*
LCD display module shows the current receiver status, including individual relay output,
proportional output, receiving signal strength, error messages...etc.
*
Maximum number of joysticks and pushbuttons on each transmitter:
1. 2 double axes joysticks plus 16 single speed pushbuttons
2. 8 single axis joysticks plus 12 single speed pushbuttons
3. If there is no joystick on the transmitter, maximum 32 single speed pushbuttons can
be installed on each transmitter.
*
Relay and proportional output:
1. Maximum 32 relays. 8pcs relays on each relay interface card, maximum 4 relay
interface cards.
2. Proportional output interface cards available:
Standard: By voltage/current:
0~+5V, 0~+10V, 0~±5V, 0~±10V, 4~20mA, 0~20mA & 0~24mA
Customized: Customized proportional output interface card (optional).
*
All Alpha 6000 function setting and selection can be done via Alpha 6000 software.
