26
simultaneou
sly
ON/safe OFF
in pairs
“EMS not to
deactivate” is
not selectable
“No
function ”is
not selectable
Software
selectable
ON PB relay
OFF PB relay
Receiver power on (Before receiving signal
from transmitter)
OFF
ON
Not to press OFF PB , press ON PB
ON
OFF
1. Not to press OFF & ON PB
2. Not to press ON PB and depress OFF PB
3. Depress OFF PB and press ON PB
OFF
ON
Press OFF & ON PB at the same time
Same status
Same status
Press EMS button or receiver receives no
signal from transmitter
Same status
Same status
Toggle
switch. Press
EMS button
and MAIN
relay remains
activate
“EMS not to
deactivate” is
not selectable
“No
function ”is
not selectable
Software
selectable
* Press button and relay become OFF to ON or ON to OFF.
* Press EMS button or receiver receives no signal from transmitter, relay
remains latched.
Toggle
switch. Press
EMS button
and MAIN
relay
deactivates
“Press EMS and
compel toggle
switch relay
open” is not
selectable
“No
function ”is
not selectable
Software
selectable
* Press button and relay become OFF to ON or ON to OFF.
* Press EMS button or receiver receives no signal from transmitter, relay off.
2
nd
EMS
button
Software is not
selectable
“No
function ”is
not selectable
“Compulsory
check” is not
selectable
* Receiver power ON, if no signal is received, 2
nd
EMS relay will be OFF.
* After transmitter is ON (no to press dual EMS button), relay ON.
* Press dual EMS button relay OFF.
* Not to press dual EMS button but press START button, relay ON.
Standard
selector
switch. Press
EMS button
and standard
selector
switch relay
close
“EMS not to
deactivate” is
not selectable
“No
function ”is
not selectable
Pre-set as “No
check” is
selectable
* Switch ON, relay ON; switch OFF, relay OFF.
* Press EMS button or receiver receives no signal from transmitter, standard
selector switch relay off.
Standard
selector
switch. Press
EMS and
standard
selector
switch relay
open
“Press EMS and
compel standard
selector switch
relay open” is
not selectable
“No
function ”is
not selectable
Pre-set as “No
check” is
selectable
* Switch ON, relay ON; switch OFF, relay OFF
* Press EMS button or receiver receives no signal from transmitter, relay off.
Speed limit
switch
“No function ”is
not selectable
“No
function ”is
not selectable
“No check
compelled” is
not selectable
* Switch types selectable: 3-position or 3-stage rotary selector switch.
* The joystick/VR output can be changed by the 3-stage limit switch
* 1
st
stage output 25%, 2
nd
stage output 50% & 3
rd
stage output 100%.
Mix mode
selector
switch
“No function ”is
not selectable
“No
function ”is
not selectable
* 1 wire to 1
switch:
software
non-selectable,
compel to
check
* 3 wires
encoding type:
software is not
selectable,
compel not to
check
* Each stage of 2~8 stage selector switch may change function for CHANNEL,
LID & EID.
* Switch condition- 1 wire to 1 switch: 2-stage rotary selector switch to 2 wires,
3-stage to 3 wires…, 8-stage to 8 wires.
* Switch condition- 3-wire encoding type, 8-stage: 3 wires to 8-stage rotary
selector switch. Non-changeable.
* Switch condition – change directly: The stage of rotary selector switch is
changed, transmitter is set to the CHANNEL/LID/EID of that stage.
* Switch condition- Re-start the power to change: The setting position of rotary
selector switch is used after transmitter power is ON. No other stage of
rotary selector switch can be used only after next time transmitter power is
ON.
* Switch condition- Press START to change: Press START and use the current
CHANNEL/LID/EID setting on rotary selector switch.
* Use channel selection to assign channel on each stage.
* Select EID ENABLE then to either assign EID on each stage or set EID on
pushbutton.
* Select LID ENABLE then to either assign LID on each stage or set LID on
pushbutton.
Group mode
selection
switch
“No function ”is
not selectable
“No
function ”is
not selectable
“Compulsory
check” is not
selectable
* Stage available: 2~8-stage rotary selector switch (wiring: 1 wire to 1 stage)
* Select relay of each stage from relay 1~8.
* Different stage may assign the same relay repeatedly.
