background image

1.Safety  .........................................................................................................5

1.1 Safety Symbols .........................................................................................................................5
1.2 Safety Guide ..............................................................................................................................5

2.Battery Safety Instructions .........................................................................6

3. Product Description ...................................................................................7

3.1 System Features ........................................................................................................................7
3.2 Transmitter Overview ...............................................................................................................8
3.3 Receiver Overview ..................................................................................................................11
3.4 Antenna ..................................................................................................................................11

4.Before Use  ................................................................................................12

4.1Transmitter Battery Installation...............................................................................................12
4.2Receiver Installation ................................................................................................................12
4.3 RF Module Adapter Installation ...............................................................................................13
4.4 Left and Right Gimbal Swap ....................................................................................................13

5. Operation Guide  ......................................................................................15

5.1 Basic Setting Guidelines..........................................................................................................15
5.2 Language Selection .................................................................................................................15
5.3 Power On ................................................................................................................................16
5.4Binding ....................................................................................................................................16
5.5 Power Off ................................................................................................................................17
5.6 Neck Strap Hook and SD Card Slot ..........................................................................................17
5.7 Warning After Turning On ........................................................................................................17
5.8 Upgrading RF Firmware ..........................................................................................................18
5.9 Upgrading Transmitter Firmware ............................................................................................19

6. Radio Interface .........................................................................................20

7. Function Settings .....................................................................................21

7.1 Select Model ...........................................................................................................................21

7.1.1 Create A Model .................................................................................................................................. 21
7.1.2 Create New Label .............................................................................................................................. 21

7.2 Channel Monitor .....................................................................................................................21
7.3 Model Settings ........................................................................................................................22

7.3.1 Model Name ...................................................................................................................................... 22
7.3.2 Model Image ...................................................................................................................................... 22
7.3.3 Use Global Function  ......................................................................................................................... 22
7.3.4 ADC Filter .......................................................................................................................................... 22
7.3.5  Internal RF ........................................................................................................................................ 22
7.3.7 Trainer ............................................................................................................................................... 24
7.3.8 Timer1 ............................................................................................................................................... 24
7.3.6 External RF ........................................................................................................................................ 24
7.3.9 Timer2 ............................................................................................................................................... 26
7.3.10 Timer3 ............................................................................................................................................. 26
7.3.11 Preflight Checks .............................................................................................................................. 26
7.3.12 Trims ............................................................................................................................................... 27

 Table of Contents

Содержание Elysium EL18


















































Отзывы: