Website
27
7.3.13 Throttle
Reverse
The throttle will be reversed after this option is selected. It is
recommended to debug in the "Mixes" menu or output setup when the
throttle reverse is set.
Source
Set the input source of the throttle. It can be set to transmitter control or
channel, generally set to "Thr".
Trim Idle Only
(To be updated...)
Trim Switch
Select the trim button to adjust the throttle, the default is "Thr".
7.3.12 Trims
With this function, you can set the step value and display mode of the
trim.
If you click "Reset", all trims will return to the initial position.
Trim step
"Exponential" To modify the trim step to exponential adjustment.
"Extra Fine" To modify the trim step value to 1.
"Fine" To modify the trim step value to 2.
"Medium" To modify the trim step value to 5.
"Coarse" To modify the trim step value to 8.
Extended Trims
After the "Expanded trims" is selected, it will expand the trim range. The
default trim can be adjusted to a maximum of 25%. After it is selected, a
maximum of 100% can be adjusted.
Display Trims
"No" The trim amount is displayed in the main interface. The current
trim value will not be displayed when the trim value is changed.
"Change" Display the current trim value when the trim value is changed.
"Yes" Always display the current trim value.
position upon power-on.
Center Beep
Set the stick midpoint detection of the channel. When the stick passes
the midpoint, the transmitter will give a prompt through vibration. The
yellow background indicates that the middle position of the channel will
be detected.
