Website
22
Elysium
EL18
7.3 Model Settings
7.3.1 Model Name
It is used to change the model name. You can view it on the model interface
after the change is completed. You can enter a maximum of 15 characters.
7.3.2 Model Image
Modify the picture corresponding to the model. The picture will be
displayed in the "Model selection" after the modification is completed. The
picture is also displayed when the model is selected as a widget in the main
interface.
The format of the picture is recommended to be: PNG format, with a
resolution of 320x480.
7.3.3 Use Global Function
Set whether the model can be controlled by use global function.
7.3.4 ADC Filter
(To be updated...)
7.3.5 Internal RF
Model
With the built-in radio frequency Flysky AFHDS 3 (Third Gen Automatic
Frequency Hopping Digital System) protocol, EL18 is compatible with
Flysky 3rd generation receivers.
It is used to set the communication protocol of the transmitter. Select
"OFF" to disable the internal radio frequency module. Select "FLYSKY" to
enable the internal radio frequency module. This can be used to bind Flysky
AFHDS 3 receivers (TM4/FTr16S/FT8B /FTr8B). For more information about
it, visit the official website of Flysky Technology: https://www.flyskycn.
com/
Module Status
Display the current connection status of transmitter and receiver.
"Disconnected" means the transmitter is not connected to the receiver,
or the receiver is not detected. "Connected" means the transmitter and
receiver are connected.
